![]() With 5.0 grains of VV N340 I get at least 1100 FPS out of my 5 inch barrel M&P9. The Lee bullet drops from my mold at an average of. While these are plated bullets I used them to establish the starting length. The 1.145 is based upon the OAL of 1.142 (Vihtavouri Site) for the true round nose bullet by Rainer or the same profile Berry's RN at 124 grains. Did any of the manuals suggest the 1.145 or is that the longest that would fit your mag and barrel? What guns have you used this in? Any of them a Hi-Point 995TS or S&W M&P Full Size pistol? markt9 Posts: 5 Joined: Has thanked: 0 time Been thanked: 0 time My Press Choice: Turret Location: MI Your picture seems that the case is up to the 2nd from last ring on the bottom of the bullet. I've been getting people saying 1.100 is what they use. I'm interested in how you came to 1.145 OAL for this bullet. This is my setup round so it is getting a bit worn but it shows the seating in the case. W231 gives me similar performance to VV340 at much less cost but Clays and Bullseye not so good. I have also tried Bullseye, W231 and Clays. Max published load is 5.1 grains but I stay just below. This is my standard IPSC bullet pushed by VV340 to an average of 1100 FPS. Manual used was Lee second edition for 124 grain lead and from the Vihtavouri website for a Rainer lead round nose. Wheel weights with 3-5% added tin solder and water quenched.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |